First impressions are quite positive. ABS is a lot more dimensionaly unstabler that PLA. To prevent severe warping a good heated bed and preferably heated chamber is a must. Also ABS smooths small details so the print comes out a lot cleaner but it lacks some detail.
I will publish a full review of the Czech ABS but currently it feels quite good and my reprap seems to like it also.
Printing settings where as follows:
- layer height 0.2mm
- perimeters 3
- bed temperature 105 C
- hotend temperature
- 265 C first layer
- 245 C all other layers
- printing speed 45mm/s
- infill 0%
- solid layers 4
I suspect that my termistor is a little off, so temperatures are indicative not absolute.
